将SOLIDWORKS文件导出为多种格式的宏
{ width=500 }
此VBA宏允许将活动SOLIDWORKS文档导出为SOLIDWORKS支持的多种格式。宏支持灵活的选项来指定文件路径,并允许同时导出多种格式。
如果目录不存在,宏将自动创建目录。
配置
可以通过修改OUT_NAME_TEMPLATES、OUT_FOLDER和ALL_CONFIGS常量来配置宏
输出名称模板
此常量允许指定导出文件的输出路径模板。它应包含定义导出格式的扩展名。
这可以是绝对路径或相对路径。如果是后者,则结果将相对于文件目录保存,或者如果不为空,则相对于OUT_FOLDER常量指定的目录保存。
OUT_FOLDER可以作为宏的参数传递
支持以下占位符
- <_FileName_> - 文档文件的名称(不包括扩展名)
- <_ConfName_> - 此文件的活动配置的名称。如果将ALL_CONFIGS选项设置为True,则会更改此配置
- <[PropertyName]> - 任何自定义属性的名称,例如\<PartNo>将替换为自定义属性PartNo的值。将尝试从配置中读取属性,如果不可用,则使用通用属性。
占位符将在运行时解析。
通过在宏的开头使用Array函数填充常量来配置值。根据需要指定尽可能多的数组元素。
以下示例将活动文档导出为PDF、DXF和JPG,并将输出文件命名为PartNo自定义属性。文件将保存在与原始文件相同的文件夹中
Sub main()
OUT_NAME_TEMPLATES = Array("<PartNo>.pdf", "<PartNo>.dxf", "<PartNo>.jpg")
以下示例将活动文件导出为Parasolid格式到D:\Exports文件夹。文件以原始文件的名称命名。
Sub main()
OUT_NAME_TEMPLATES = Array("D:\Exports\<_FileName_>.x_t")
导出选项
可以通过更改STEP_VERSION常量的值来配置STEP格式的导出选项。将其设置为214以使用AP214格式,或将其设置为203以使用AP203格式。
Const STEP_VERSION As Long = 214 '203 or 214
要导出3D PDF,请将PDF_3D常量设置为True
Const PDF_3D As Boolean = True
将组件数量包含到文件名中
如果此宏用于汇编的所有组件,则可能需要将BOM数量包含到文件名中。使用将SOLIDWORKS装配中的组件数量写入自定义属性宏。在导出之前,运行此宏以创建具有数量值的自定义属性,然后使用\<Qty>占位符将其包含到输出文件名中。
处理所有配置
如果将ALL_CONFIGS常量设置为True,宏将逐个激活所有配置(对于装配和零件)或所有绘图页(对于绘图),然后运行导出命令。
故障排除
如果宏报告错误,在某些情况下,可能不会立即明确导致错误的原因,因为错误详细信息被异常处理程序“吞噬”了。为了禁用错误处理并显示导致错误的确切行,请在代码中将所有On Error GoTo catch_行注释掉,方法是在行的开头放置撇号',如下所示。
Sub main()
Set swApp = Application.SldWorks
try_:
'On Error GoTo catch_
请提交错误报告,并附上此错误的快照和用于重现的模型(如果可能)
Const ALL_CONFIGS As Boolean = False
Const OUT_FOLDER As String = ""
Const STEP_VERSION As Long = 214 '203 or 214
Const PDF_3D As Boolean = False 'True to export 3D PDF
Dim OUT_NAME_TEMPLATES As Variant
Dim swApp As SldWorks.SldWorks
Sub main()
Dim origStepVersion As Long
OUT_NAME_TEMPLATES = Array("PDFs\<_FileName_>_<_ConfName_>_<PartNo>.pdf", "IMGs\<_FileName_>_<_ConfName_>_<PartNo>.jpg")
Set swApp = Application.SldWorks
try_:
On Error GoTo catch_
Dim swModel As SldWorks.ModelDoc2
Set swModel = swApp.ActiveDoc
If swModel Is Nothing Then
Err.Raise vbError, "", "请打开文档"
End If
If swModel.GetPathName() = "" Then
Err.Raise vbError, "", "请保存模型"
End If
Dim outFolder As String
If Not TryGetOutDirFromArguments(outFolder) Then
outFolder = OUT_FOLDER
End If
ReadOptions origStepVersion
SetupOptions STEP_VERSION
ExportFile swModel, OUT_NAME_TEMPLATES, ALL_CONFIGS, outFolder
GoTo finally_
catch_:
swApp.SendMsgToUser2 Err.Description, swMessageBoxIcon_e.swMbStop, swMessageBoxBtn_e.swMbOk
finally_:
SetupOptions origStepVersion
End Sub
Sub ReadOptions(ByRef stepVersion As Long)
stepVersion = swApp.GetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swStepAP)
End Sub
Sub SetupOptions(stepVersion As Long)
If False = swApp.SetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swStepAP, stepVersion) Then
Err.Raise vbError, "", "无法将Step导出版本设置为" & stepVersion
End If
End Sub
Sub ExportFile(model As SldWorks.ModelDoc2, vOutNameTemplates As Variant, allConfigs As Boolean, outFolder As String)
Dim i As Integer
Dim j As Integer
Dim curConf As String
If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
Dim swDraw As SldWorks.DrawingDoc
Set swDraw = model
curConf = swDraw.GetCurrentSheet().GetName
Else
curConf = model.ConfigurationManager.ActiveConfiguration.Name
End If
Dim vConfs As Variant
If allConfigs Then
If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
vConfs = model.GetSheetNames()
Else
vConfs = model.GetConfigurationNames()
End If
Else
Dim sConfs(0) As String
sConfs(0) = curConf
vConfs = sConfs
End If
For i = 0 To UBound(vConfs)
If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
curConf = swDraw.ActivateSheet(CStr(vConfs(i)))
Else
model.ShowConfiguration2 CStr(vConfs(i))
End If
For j = 0 To UBound(vOutNameTemplates)
Dim errs As Long
Dim warns As Long
Dim outNameTemplate As String
outNameTemplate = vOutNameTemplates(j)
Dim outFilePath As String
outFilePath = ComposeOutFileName(outNameTemplate, model, outFolder)
Dim outDir As String
outDir = Left(outFilePath, InStrRev(outFilePath, "\"))
CreateDirectories outDir
Dim swExportData As Object
If LCase(GetExtension(outFilePath)) = LCase("pdf") Then
Dim swExportPdfData As SldWorks.ExportPdfData
Set swExportPdfData = swApp.GetExportFileData(swExportDataFileType_e.swExportPdfData)
swExportPdfData.ViewPdfAfterSaving = False
swExportPdfData.ExportAs3D = PDF_3D
Set swExportData = swExportPdfData
Else
Set swExportData = Nothing
End If
If False = model.Extension.SaveAs(outFilePath, swSaveAsVersion_e.swSaveAsCurrentVersion, swSaveAsOptions_e.swSaveAsOptions_Silent, swExportData, errs, warns) Then
Err.Raise vberrror, "", "导出到" & outFilePath & "失败"
End If
Next
Next
If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
curConf = swDraw.ActivateSheet(curConf)
Else
model.ShowConfiguration2 curConf
End If
End Sub
Function ComposeOutFileName(template As String, model As SldWorks.ModelDoc2, outFolder As String) As String
Dim regEx As Object
Set regEx = CreateObject("VBScript.RegExp")
regEx.Global = True
regEx.IgnoreCase = True
regEx.Pattern = "<[^>]*>"
Dim regExMatches As Object
Set regExMatches = regEx.Execute(template)
Dim i As Integer
Dim outFileName As String
outFileName = template
For i = regExMatches.Count - 1 To 0 Step -1
Dim regExMatch As Object
Set regExMatch = regExMatches.Item(i)
Dim tokenName As String
tokenName = Mid(regExMatch.Value, 2, Len(regExMatch.Value) - 2)
outFileName = Left(outFileName, regExMatch.FirstIndex) & ResolveToken(tokenName, model) & Right(outFileName, Len(outFileName) - (regExMatch.FirstIndex + regExMatch.Length))
Next
ComposeOutFileName = ReplaceInvalidPathSymbols(GetFullPath(model, outFileName, outFolder))
End Function
Function ReplaceInvalidPathSymbols(path As String) As String
Const REPLACE_SYMB As String = "_"
Dim res As String
res = Right(path, Len(path) - Len("X:\"))
Dim drive As String
drive = Left(path, Len("X:\"))
Dim invalidSymbols As Variant
invalidSymbols = Array("/", ":", "*", "?", """", "<", ">", "|")
Dim i As Integer
For i = 0 To UBound(invalidSymbols)
Dim invalidSymb As String
invalidSymb = CStr(invalidSymbols(i))
res = Replace(res, invalidSymb, REPLACE_SYMB)
Next
ReplaceInvalidPathSymbols = drive + res
End Function
Function ResolveToken(token As String, model As SldWorks.ModelDoc2) As String
Const FILE_NAME_TOKEN As String = "_FileName_"
Const CONF_NAME_TOKEN As String = "_ConfName_"
Select Case LCase(token)
Case LCase(FILE_NAME_TOKEN)
ResolveToken = GetFileNameWithoutExtension(model.GetPathName)
Case LCase(CONF_NAME_TOKEN)
If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
Dim swDraw As SldWorks.DrawingDoc
Set swDraw = model
ResolveToken = swDraw.GetCurrentSheet().GetName
Else
ResolveToken = model.ConfigurationManager.ActiveConfiguration.Name
End If
Case Else
Dim swCustPrpMgr As SldWorks.CustomPropertyManager
Dim resVal As String
resVal = ""
If model.GetType() <> swDocumentTypes_e.swDocDRAWING Then
Set swCustPrpMgr = model.Extension.CustomPropertyManager(model.ConfigurationManager.ActiveConfiguration.Name)
swCustPrpMgr.Get2 token, "", resVal
End If
If resVal = "" Then
Set swCustPrpMgr = model.Extension.CustomPropertyManager("")
swCustPrpMgr.Get2 token, "", resVal
End If
ResolveToken = resVal
End Select
End Function
Function GetFileNameWithoutExtension(path As String) As String
GetFileNameWithoutExtension = Mid(path, InStrRev(path, "\") + 1, InStrRev(path, ".") - InStrRev(path, "\") - 1)
End Function
Function GetExtension(path As String) As String
GetExtension = Right(path, Len(path) - InStrRev(path, "."))
End Function
Function FileExists(filePath As String) As Boolean
FileExists = Dir(filePath) <> ""
End Function
Sub CreateDirectories(path As String)
Dim fso As Object
Set fso = CreateObject("Scripting.FileSystemObject")
If fso.FolderExists(path) Then
Exit Sub
End If
CreateDirectories fso.GetParentFolderName(path)
fso.CreateFolder path
End Sub
Function GetFullPath(model As SldWorks.ModelDoc2, path As String, outFolder As String)
GetFullPath = path
If IsPathRelative(path) Then
If Left(path, 1) <> "\" Then
path = "\" & path
End If
If outFolder = "" Then
Dim modelPath As String
Dim modelDir As String
modelPath = model.GetPathName
modelDir = Left(modelPath, InStrRev(modelPath, "\") - 1)
outFolder = modelDir
Else
If Right(outFolder, 1) = "\" Then
outFolder = Left(outFolder, Len(outFolder) - 1)
End If
End If
GetFullPath = outFolder & path
End If
End Function
Function IsPathRelative(path As String)
IsPathRelative = Mid(path, 2, 1) <> ":" And Not IsPathUnc(path)
End Function
Function IsPathUnc(path As String)
IsPathUnc = Left(path, 2) = "\\"
End Function
Function TryGetOutDirFromArguments(ByRef outDir As String) As Boolean
try_:
On Error GoTo catch_
Dim macroRunner As Object
Set macroRunner = CreateObject("CadPlus.MacroRunner.Sw")
Dim param As Object
Set param = macroRunner.PopParameter(swApp)
Dim vArgs As Variant
vArgs = param.Get("Args")
outDir = CStr(vArgs(0))
TryGetOutDirFromArguments = True
GoTo finally_
catch_:
TryGetOutDirFromArguments = False
finally_:
End Function