将SOLIDWORKS装配中的组件数量写入自定义属性
这个VBA宏可以计算SOLIDWORKS装配中每个组件的总数量,并将其写入自定义属性中。
这个宏可以与从零件或装配组件导出平展图案和导出到多种格式宏一起使用。
配置
可以通过更改宏开头的常量参数来配置宏,如下所示:
Const PRP_NAME As String = "Qty" '要写入数量的自定义属性的名称
Const MERGE_CONFIGURATIONS As Boolean = False '将所有配置视为单个项目时为True
Const INCLUDE_BOM_EXCLUDED As Boolean = False '基于特征管理器树而不是BOM写入数量时为True
注意事项
- 宏将考虑用户通过自定义属性(UNIT_OF_MEASURE)设置的数量
- 宏将考虑子组件的配置BOM选项(显示、提升或隐藏)
- 如果MERGE_CONFIGURATIONS设置为false,则宏将数量属性写入配置;否则,宏将数量属性写入文档属性
- 如果当前范围中不存在数量(例如,组件在BOM中被排除),宏将不会清除现有的数量
- 宏将无法处理未加载的组件(例如,轻量级组件)
- 宏将尝试解析所有轻量级组件
Type BomPosition
model As SldWorks.ModelDoc2
Configuration As String
Quantity As Double
End Type
Const PRP_NAME As String = "Qty"
Const MERGE_CONFIGURATIONS As Boolean = False
Const INCLUDE_BOM_EXCLUDED As Boolean = False
Dim swApp As SldWorks.SldWorks
Sub main()
Set swApp = Application.SldWorks
try_:
On Error GoTo catch_
Dim swAssy As SldWorks.AssemblyDoc
Set swAssy = swApp.ActiveDoc
If swAssy Is Nothing Then
Err.Raise vbError, "", "未打开装配"
End If
swAssy.ResolveAllLightWeightComponents True
Dim swConf As SldWorks.Configuration
Set swConf = swAssy.ConfigurationManager.ActiveConfiguration
Dim bom() As BomPosition
ComposeFlatBom swConf.GetRootComponent3(True), bom
If (Not bom) <> -1 Then
WriteBomQuantities bom
End If
GoTo finally_
catch_:
MsgBox Err.Description, vbCritical, "计算组件数量"
finally_:
End Sub
Sub ComposeFlatBom(swParentComp As SldWorks.Component2, bom() As BomPosition)
Dim vComps As Variant
vComps = swParentComp.GetChildren
If Not IsEmpty(vComps) Then
Dim i As Integer
For i = 0 To UBound(vComps)
Dim swComp As SldWorks.Component2
Set swComp = vComps(i)
If swComp.GetSuppression() <> swComponentSuppressionState_e.swComponentSuppressed And (False = swComp.ExcludeFromBOM Or INCLUDE_BOM_EXCLUDED) Then
Dim swRefModel As SldWorks.ModelDoc2
Set swRefModel = swComp.GetModelDoc2()
If swRefModel Is Nothing Then
Err.Raise vbError, "", swComp.GetPathName() & " 模型未加载"
End If
Dim swRefConf As SldWorks.Configuration
Set swRefConf = swRefModel.GetConfigurationByName(swComp.ReferencedConfiguration)
Dim bomChildType As Integer
bomChildType = swRefConf.ChildComponentDisplayInBOM
If bomChildType <> swChildComponentInBOMOption_e.swChildComponent_Promote Then
Dim bomPos As Integer
bomPos = FindBomPosition(bom, swComp)
If bomPos = -1 Then
If (Not bom) = -1 Then
ReDim bom(0)
Else
ReDim Preserve bom(UBound(bom) + 1)
End If
bomPos = UBound(bom)
Dim refConfName As String
If MERGE_CONFIGURATIONS Then
refConfName = ""
Else
refConfName = swComp.ReferencedConfiguration
End If
Set bom(bomPos).model = swRefModel
bom(bomPos).Configuration = refConfName
bom(bomPos).Quantity = GetQuantity(swComp)
Else
bom(bomPos).Quantity = bom(bomPos).Quantity + GetQuantity(swComp)
End If
End If
If bomChildType <> swChildComponentInBOMOption_e.swChildComponent_Hide Then
ComposeFlatBom swComp, bom
End If
End If
Next
End If
End Sub
Function FindBomPosition(bom() As BomPosition, comp As SldWorks.Component2) As Integer
FindBomPosition = -1
Dim i As Integer
If (Not bom) <> -1 Then
Dim refConfName As String
If MERGE_CONFIGURATIONS Then
refConfName = ""
Else
refConfName = comp.ReferencedConfiguration
End If
For i = 0 To UBound(bom)
If LCase(bom(i).model.GetPathName()) = LCase(comp.GetPathName()) And LCase(bom(i).Configuration) = LCase(refConfName) Then
FindBomPosition = i
Exit Function
End If
Next
End If
End Function
Function GetQuantity(comp As SldWorks.Component2) As Double
On Error GoTo err_
Dim refModel As SldWorks.ModelDoc2
Set refModel = comp.GetModelDoc2
Dim qtyPrpName As String
qtyPrpName = GetPropertyValue(refModel, comp.ReferencedConfiguration, "UNIT_OF_MEASURE")
If qtyPrpName <> "" Then
GetQuantity = CDbl(GetPropertyValue(refModel, comp.ReferencedConfiguration, qtyPrpName))
Else
GetQuantity = 1
End If
Exit Function
err_:
Debug.Print "提取 " & comp.Name2 & " 的数量失败: " & Err.Description
GetQuantity = 1
End Function
Function GetPropertyValue(model As SldWorks.ModelDoc2, conf As String, prpName As String) As String
Dim confSpecPrpMgr As SldWorks.CustomPropertyManager
Dim genPrpMgr As SldWorks.CustomPropertyManager
Set confSpecPrpMgr = model.Extension.CustomPropertyManager(conf)
Set genPrpMgr = model.Extension.CustomPropertyManager("")
Dim prpResVal As String
confSpecPrpMgr.Get3 prpName, False, "", prpResVal
If prpResVal = "" Then
genPrpMgr.Get3 prpName, False, "", prpResVal
End If
GetPropertyValue = prpResVal
End Function
Sub WriteBomQuantities(bom() As BomPosition)
Dim i As Integer
If (Not bom) <> -1 Then
For i = 0 To UBound(bom)
Dim refConfName As String
Dim swRefModel As SldWorks.ModelDoc2
Set swRefModel = bom(i).model
If MERGE_CONFIGURATIONS Then
refConfName = ""
Else
refConfName = bom(i).Configuration
If swRefModel.GetBendState() <> swSMBendState_e.swSMBendStateNone Then
Dim swConf As SldWorks.Configuration
Set swConf = swRefModel.GetConfigurationByName(refConfName)
Dim vChildConfs As Variant
vChildConfs = swConf.GetChildren()
If Not IsEmpty(vChildConfs) Then
Dim j As Integer
For j = 0 To UBound(vChildConfs)
Dim swChildConf As SldWorks.Configuration
Set swChildConf = vChildConfs(j)
If swChildConf.Type = swConfigurationType_e.swConfiguration_SheetMetal Then
SetQuantity swRefModel, swChildConf.Name, bom(i).Quantity
End If
Next
End If
End If
End If
SetQuantity swRefModel, refConfName, bom(i).Quantity
Next
End If
End Sub
Sub SetQuantity(model As SldWorks.ModelDoc2, confName As String, qty As Double)
Dim swCustPrpsMgr As SldWorks.CustomPropertyManager
Set swCustPrpsMgr = model.Extension.CustomPropertyManager(confName)
swCustPrpsMgr.Add3 PRP_NAME, swCustomInfoType_e.swCustomInfoText, qty, swCustomPropertyAddOption_e.swCustomPropertyReplaceValue
swCustPrpsMgr.Set2 PRP_NAME, qty
End Sub